Low-Power 2.5" SBC with NXP ARM® Cortex-A9 i.MX 6Dual-Lite 1GHz Processor

NXP Cortex™-A9, i.MX 6Dual-Lite 1GHz processorSupports HDMI and single LVDS interfaceSupports 1GB DDR3, 4GB eMMC and Micro SD socket for expansionEmbedded I/O as COM, GPIO, USB, USB-OTG, audio and EthernetM.2 Key-E (2230) for wireless connectivityOpenGL ES 2.0 for 3D BitBlt for 2D and OpenVG1.1
Form Factor 2.5-inch Disk-Size SBC
Processor NXP Cortex™-A9 i.MX 6Dual-Lite, 1GHz
CPU NXP Cortex™-A9 i.MX 6Dual-Lite 1GHz
System Memory 1GB DDR3 on board
Flash Memory 4GB eMMC on board (optional 8/16/32/64 GB)
Display 1x 18/24-bit single LVDS, up to 1366 x 768
1x HDMI V1.4, up to 1080P at 60Hz
Video Codec • i.MX53 + VP6 / WebM VP8, H.264 MVC
• 1080p30 + D1
• 1080p30 H.264BP
• Dual 720p encode
Graphics • Vivante GC880, OpenGL ES 2.0
• Vivante GC320
Watchdog 256 levels, 0~128 secs
Edge I/O 1x RJ45 GbE LAN
1x USB Type-A
1x USB OTG (mini-USB Type-B)
1x RS232/422/485 (D-SUB 9 male connector)
1x Micro SD socket (UHS-I SDR-104, max.104MB/s)
1x Reset button
Internal I/O 1x LVDS connector (Hirose DF13-20)
1x Backlight, 3.3V/1A, 5V/1A, 12/1A (jumper selection)
1x 4-pin wafer (for debug console port)
1x Audio pin header (Line-in and Line-out)
2x 2-wire UART (1x6 pin header,1.0mm)
2x USB 2.0 (2*5 pin header 1.0mm)
1x M.2 Key-E (2230) w/ PCI-E, USB, SDIO, UART
8x GPIO (2*5 pin header 1.0mm)
2x Green LEDs (for Power On/Off, and Wireless status)
Dimensions 100mm x 72mm (3.94” x 2.83”)
Power Input 12V DC-in Jack
Operating Temperature -40°C ~ 85°C
Relative Humidity 10%~90% (non-condensing)
OS Support Yocto v2.1 (Kernel 4.1.15)
Android 6.0.1 (Kernel 3.14.52)
Devices WiFi/BT modul (option)
Certification CE/ FCC Class B
IBR115 2.5” ARM-based SBC, NXP Cortex™-A9, i.MX 6Dual-Lite 1GHz, 1GB DDR, 4GB eMMC, Single
LVDS, HDMI, RS-234/422/485, USB, M.2 Key-E (2230)
2020 RISC Based Embedded Solutions